In need of some terrain for your wargame? Short of time? Print these pieces and create your own defense line / trench system for your favorite 28mm sci-fi games.
The six different sections can be printed as many times as you want and combined to create endless layout variations. For example the following layout requires three bunker sections, four corner sections, two each of the straight, inside and outside wall sections, and a single end section. That's just 4 hours and 12 minutes of printing time, and 93 grams of PLA, using a 0.8mm nozzle!
These pieces print fast! Using vase mode, print the models in the orientation they download - i.e. upside down.
The printed models are light, and you may choose to base them to add weight.
Print times are based on a Crealty Ender 3v2:
The author marked this model as their own original creation.