build plate and glass holders are not correct, they need to be redone
build plate and glass holders are not correct, they need to be redone
Ouch! Any idea what happened here? Used the STL files and printed it on my bambu printer so trying to figure out what caused the mismatch.
@3DTech_46582 Never mind, wife turns out to be the real engineer.
@JohnMcD_1104224
where did you get the piece that hold on top?
is this compatible with the dx riser with vents?
@john_490701 If the riser has space on top for the glass to fit inside (3mm high ledge) then it should fit.
Black PETG - I manually added a few supports, which was great.
Had no problems printing but was a bit long, did not see the updated version until I was on the last plate.
@DutchWorkX3D does the v3 riser Drawer adapter work with the v2?
@SAH4001 Will check, maybe some remixing but should be possible if it doesn't fits.
@_928611 where can i find the led riser so i can put my AMS on top? STL please
I printed v3 using the settings file, which turned on regular supports. The rear ones came out perfect, but the front ones filled half the hexagon holes with support material that is not coming out. Did I do something wrong? Is everyone else using auto regular supports?
@DutchWorkX3D sorry. I said it backwards. It was the front that printed fine. It was the two back pieces that had excessive support. I will post a picture when I get home.
@tdewar_513747 for the back parts the same, only supports with build plate only
Overall came out really well but as you can maybe see in the image the glass top doesn't quite sit flat as the glass seems to be a mm or 2 too wide for the build. Likely a print issue and not really impacting me.
Great design and fit snug. Had some print quality issues and need to fine tune that.
@DutchWorkX3D of course
@raulsidea_1045605 Thanks :-)