Vive HMD Mount

Hi there,

i slightly edited this model so the holes can accept and sink a 4mm screw to use with 5 mm plugs. in the second photo you can see a combo with a remix i made for a Vive controller wall mount you can find here: https://www.printables.com/model/553070-htc-vive-controller-wall-mount. 

a drill guide to mount these on the wall can also be found here: https://www.printables.com/model/556507-drill-guide-for-htc-vive


Note: The Provided Gcode is for a MK3s MMu2s with a 0.6mm nozzle.
The MMU2 Neither the 0.6 mm nozzle are required