HueForge Lonely Knight

I wanted a Dark Soulsesque decal for the side of my computer case.

Midjourney generated this awesome image of a knight sitting alone by a campfire in the mountains and Hueforge did a fantastic job of painting it.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Scarlet Red Transmission Distance: 2.7
PLA BambuLab Matte Mandarin Orange Transmission Distance: 3.4
PLA BambuLab Matte Ivory White Transmission Distance: 4

Swap Instructions:
Start with Charcoal
At layer #6 (0.56mm) swap to Scarlet Red
At layer #11 (0.96mm) swap to Mandarin Orange
At layer #16 (1.36mm) swap to Ivory White for the rest.