PINECIL & TS100/101 ALL-IN-ONE CASE

-Uses six M3x20 screws for the hinges and latch.

-Uses two 3mm x 1mm magnets for the small parts storage compartment (optional).

Storage for:

1 x Pinecil (TS100/TS101 BETA versions still testing)

7 x Short Tips (6 x Tips for TS100/TS101 due to dimensional differences)

1 x Long/Short Tip (installed in soldering iron)

1 x Flux Syringe (1 ml) OR Flux Syringe (6 ml) OR Alternate Large Slot

1 x Magnetic Storage Compartment for Small/Spare Parts (Need Four 3mm x 1mm Magnets)

1 x 608 Bearing Stand (from V2 stand from Termiman or my remixed version)

2 x Solder/Ribbon Spools from Termiman

1 x Slot for Wet Sponge

1 x Slot for Brass Sponge

1 x Slot for 1.5m USB-C Cable

INFO & TIPS:

-To load up your own 1ml oral syringe; you can melt flux until liquid (with a hair-dryer or heatgun) and suck it up.

-The 4 magnets (3mm x 1mm) for the storage container, might need a dab of superglue. I tried to make a magnet-less hinge and compliant latch, but there isn't a ton of room to work.

Started with PjotrStrog's “Rugged Case”. Reconfigured some of Termiman's original inserts & stand. Used Computerbomb's 7-slot tip holder in the creation of my insert. Used Lndnny's lid to create a “Miniware” logo version.