Oatchi From Pikmin 4
69
285
3
1256
updated August 16, 2023

Description

PDF

After finishing Pikmin 4 I decided I wanted to make my own life size Oatchi

Full Oatchi model is available if you wish to print it all in one go. 

If you only have a single filament printer all the files are sorted in folders by print color.

Printing :

  • Use supports for the Head and the Tail Bulb
  • Set infill to 10% to give the model a good weight to it
  • The object pictured was printed at a 30% scale. I left the STL files oversized so that you may go as big or small as you'd like
  • I wouldn't recommend going any lower than 20% scale. I printed it at that size and it still looked fine. It might work smaller I just haven't tried it.
  • Glue all pieces together with just a dab of super glue.

Make Oatchi Stand Up

Oatchi in general has a very awkward body shape. Since he has a large head he doesn't stand up on his own which is why I also created a cool Pikmin flower amiibo stand that you can glue him on to make him stand.

Customizable Collar Color:

  • If you want to be able to replace the color of the collar. Its removable. Both the head and body fit and hold together tightly without glue.

DONT GLUE THE HEAD AND BODY TOGETHER IF YOU WISH TO CHANGE THE COLLAR

                                                                    Happy Printing!

 

Tags



Model origin

The author marked this model as their own original creation.

License