Just a simple low poly filament spool.
The model consists of three parts. The filament which is available in three different sizes and the spool which is built using the “spoolinside” and “spooloutside” part.
You simply stick the filament on the “outside” part and the “inside” part sticks into the other side.
No supports required, 5-10% infill works perfectly fine.
The parts slide in and out really well with a 0.2 and 0.4 nozzle. If you are printing at high speed and 0.6 or 0.8 nozzle you might want to scale the filament to 101% and the “spoolinside” to 99% for easier assembly.
I hope you enjoy it!
The author marked this model as their own original creation.