CZ457 Pro-Varmint Cheek Riser (Boyd Stock)

Since I had medium scope rings available after grabbing my Pro Varmint I needed a little more height for a cheek weld. So I played around and designed this model. The original model “Cheek22mm” is what I went with for my comfort. In turn I also created a second version “Cheek14mm” for those who may be able to get by with that. This was designed around my CZ457 Pro varmint taking measurements from my Boyd stock. My design fits my stock well with very little slop however I hold mine in place with a few tabs of Velcro. Other stocks could vary.

The 14mm and 22mm is measured from the top of the Boyd stock to the top of the cheek riser. So keep that in mind if using Velcro.

I wanted to add that the shorter side of the Cheek riser is meant for the left side of the stock

My settings and filament

PLA

3 Perimeters

15% infill.

Speed (your choice)