MadLabRemix - DJI Googles/DJI Goggles RE Wall Mount
DJI Goggles/DJI Goggles Racing Edition (RE) wall mount. No supports.
5
15
0
313
updated August 25, 2023
Description
PDFI am unable to find a wall mount for my original DJI Goggles so I made this. I believe this should also fit the DJI Goggles Racing Edition.
When I design or remix, I try to minimize material cost and printing time while keeping it functional.
HAPPY PRINTING and REMIX AWAY!!! Let me know if you have any questions.
Please LIKE if you LIKE them! Thank you!!!
| BOM TO BUY: (As an Amazon Associate I earn from qualifying purchases.) | ||
| PLA/PLA+/PETG/ABS | Kingroon | https://amzn.to/457lvnV |
Notes: PLA recommendations I use are above.
| BOM TO 3D PRINT: | ||
| Material Usage | Print Time | |
| DJI_Goggles_Wall_Mount | 181g (60.72m) | 13 hrs 3 mins |
Notes:
| PRINT/SLICER SETTINGS: | |
| 3D Printer | Ender 3 (Direct Drive) |
| Slicer | Ultimaker Cura 5.4.0 |
| Nozzle | 0.4mm |
| Layer Height | 0.28 |
| Wall Line Count | 3 |
| Bottom/Top Thickness | 1.3 |
| Infill | 5% (Adjust as needed) |
| Print Speed | 80mm/s |
| Retraction Distance/Speed | 0.8mm @ 45mm/s |
| Supports | None |
| Adhesion Type | Brim 2mm (As needed) |
| Print Orientation | Back Side Down |
Notes: Nozzle and bed temperature depends on the manufacturer of filament you are using. Use manufacturer's suggested temperature.
| STL FILES |
| DJI_Goggles_Wall_Mount |
Tags
Model origin
The author marked this model as their own original creation.
