The GPD Micro is a handy beast when dealing with physical hardware. Serial port, ethernet port, handy form-factor, all-round good guy.
But finding a flat surface in the rack can be a pain and the small form factor does make typing a bit of a challenge. So here's a small rackable tray to support the GPD Micro in your rack while you're working.
Spacing is for 1RU standard. I stuck this in a Sun rack using the provided M8 screws; you might need slightly longer than average cage nut screws in your case.
I'd recommend printing out of PETG or ABS rather than PLA to avoid heat creep.
The author marked this model as their own original creation.