holder for filament spool located on the Z-axis , for different coil widths (60,70,80,100mm)
26
174
1
1291
updated September 5, 2023

Description

PDF

The base must be screwed to the shaft with 3x M4x25 mm Allen screws. You also need 3x M4 nuts which are inserted into the shaft from the bottom.

When installing, remove the top bearing plate , insert it into the base and slide the base onto the aluminium profile from above and retighten. You may need longer screws (M5).

Tags



Model origin

The author marked this model as their own original creation.

License