Wheel Stand 2 Portability Wheels

Wheels for the Next Level Racing Wheel Stand 2.0 to help move it around, I hear that some versions of this came with wheels, but mine did not.

This is designed to use TPU wheels, but I think you could get away with printing them in PLA.

The parts you need for this design are

M8 X 20 = 4

M8 X 40 = 2

608 bearings = 4

Print the brackets with support as show in the print bed pictures.

I designed the holes in the wheels to not need support if printed in .2 layer height, bigger layer heights will screw up the self supporting holes.

The TPU settings I used are

.4nozzle, .2 layer height, 3 perimeters 30% infill.