Efficient Tuning Tower (for temperature, fan, etc.)

Compact tuning tower with essential minimum features.

• Bridge: 25.0mm
• Overhang: 25° and 35°
• Hole DIA: 3.0mm
• Height of each tier: 8.0mm
  (including 1st tier)
   

[ Available in 1 - 12 Tiers ]
Using a tower with the required minimum number of tiers for testing helps save the printing time and material. 

[ No Label ]
The labels for each tier have been omitted, considering their use for tests beyond temperature, such as cooling fan speed and retractions.
Additionally, you can test with your preferred temperature range without having to worry about the labels. 

[ Compact Size ]
Due to its compact design compared to typical temperature towers, printing is completed in a relatively short time.

[ Easy Slicing ]
All tiers are 8.0mm in height. The height of the first tier, including the base plate, is also designed to be the same as the height of the subsequent tiers.
Therefore, there is no need to consider the height of the base plate when configuring slicing settings.
(1st tier: Z 8.0mm / 2nd tier: Z 16.0mm / 3rd tier: Z 24.0mm / …)