BTT HDMI5 v1.1 screen case

Simple case for BTT HDMI5 screen
31
363
8
1487
updated November 2, 2024

Description

PDF

This is a BigTreeTech HDMI5 1.1 case. Screen screws in the “back” part and the case “front” part snaps to the “back”.

3 different angle brackets (25°, 45° or 90°) which slide in to the "back" part. Each of these brackets have either an M6 or M5 hole for mounting.

The bracket and the case can be joined together in a way that lets the cables be on the left side or right side.

Printing settings:

  • 0.2 layer height
  • 3 perimeters, bottom and top
  • 15% gyroid infill
  • No supports

The bracket is designed for a tight fit and depending on your printer precision it can be very hard to slide in the “back” part. 

(If you have trouble with the bracket fitting the “back” part, you can try to use the slicer and downscale the bracket to 98-99% size.)

The snap connectors on the “back” part are not very strong, due to printing orientation, so be a bit gentle when assembling or disassembling (check 2024-11-02 update for improvement).

PARTS REQUIRED FOR MOUNTING : 1pcs - M6 or M5 T-nut

 

Update:

2024-01-01

  • Added STEP file for all the v1 parts.

2024-11-02

  • Added new model for the “back” part - “Back v2. The snap connectors are now separated from the “back”, you will need a maximum of 8 connectors.
  • Added a model “Back connector test” to test the fit between the “back” part and the snap connector.
  • Added 3 snap connectors with different tolerances. Print them along with one “Back connector test” to see which connector fits best for you. You can also use the slicer and scale the connector to get the right fit you want or just simply use super glue. Personally, I just used the “no gap” version, filed it down a bit and forced it into the “back" part for a very tight fit.

Tags



Model origin

The author marked this model as their own original creation.

License