Ubiquiti UAP-AC-Lite Adapter Plate

made this adapter plate to fit a ubiquiti UAP-AC-LITE be able to fit a low voltage box. Version 2 is fully centered around both the AP and low voltage box but requires an extra screw.
I used 10-32 x 1/2" flat screws to mount the AP bracket to the adapter plate.

Print instructions

Category: Electronics Summary

made this adapter plate to fit a ubiquiti UAP-AC-LITE be able to fit a low voltage box. Version 2 is fully centered around both the AP and low voltage box but requires an extra screw.
I used 10-32 x 1/2" flat screws to mount the AP bracket to the adapter plate.

Print Settings

Printer:

Anet ET4

Supports:

No

0.2

Infill:

25%