Wall mount for a Lenovo M10 Plus (3rd Generation) tablet. You have access to the physical buttons (wake-up and volume), cutout for a 90 degree charging cable and the camera in the top center.
The charging cable is UGREEN "USB Type C Cable 90 Degree": https://tc.tradetracker.net/?c=15640&m=12&a=417111&r=&u=%2Fitem%2F32855214352.html
The model has no holes to attach the wall mount with screws, but you can use double-sided tape.
Printed flat with support for the overhanging part, adjust this properly in your slicer. Used a 0.4 nozzle and 0.2mm layer hight using PETG. PLA should also work fine.
The author marked this model as their own original creation.