This medal hanger clamps the band of a medal so that they can be presented nicely.
It is designed for medals from the conqueror and the presented pictures are from the LoTR challenges. The LoTR pictures are from amazon.
You need m3 flathead screws to mount it and all other parts are glued together. Some silicone grease was used, but that is optional. Theoretically no glue is needed. You have to ensure, that the two gears are aligned the same way on each axle.
You will have to push the barrels to the top to fixate the medals for hanging. It will make sense once you printed one. :D
For one hanger, you need to print:
The author marked this model as their own original creation.