3D Modeling noob trying new things.
Permanently mountable solution with standard wood screws to a desk or wall. Perfect for office, workshop, home, etc. Simple model that I wanted to be compact and rigid. This model (using a standard PLA) shouldn't experience any bending from the weight of many cables or heavier gauge wire.
Sharp 90 degree edges on the back to flush mount, with beveled corners on the front for a smooth look. Slit is larger at the bottom to make it easier to route cables into the hanger, but tapers to a smaller opening at the top to avoid cables slipping out via gravity. Which is also why entry channel is on a steep angle as well.
The author marked this model as their own original creation.