Printed a chip guard for my emco maximat super 11. I used the existing mounting holes M6 for the guard and also the M8 hole as a support when its closed.
The guard pivots around a 6 mm steel rod (approx. 150mm long). I have to drill out the 6mm hole that mounts the guard for a proper fit.
The 3 parts are glues together with “UHU Hartkunststoff Spezialkleber tansparent” - see photo.
Could not print the model in one setup - it lost its adhesion to the bed after some hours of printing:-(
Material:
Extrudr PETG transparent
6mm Steel Rod approx. 150 mm long
2 x M6 x 20 Socket Head Cap Screw
1 x M8 x 20 Socket Head Cap Screw
Plasic Glue - see text
The author marked this model as their own original creation.