Customizable Shutter Fidget & New shutters

A mini (and now customizable!) quiet fidget with a lot of tactile feedback in its small frame.

https://youtu.be/W6o0j-xrIEU

https://youtu.be/M5QoJNZkU1U 

Printing

• All parts can be printed without supports.
• Add a brim if your printer has any difficulty with curling around sharp corners.
• For a stronger shutter, use PETG and print entirely in perimeter lines.

Assembly

• Wrap the shutter around the bottom case
• Optional: wrap a rubber band around the shutter to hold it in place
• Optional: add a few drops of silicone oil behind the shutter
• Align the top case with the shutter and bottom case
• Press firmly until the cases click together
• Optional: Use a clamp if cases don't click easily

Can I sell copies of this?

Yes! This project was shared under the Creative Commons - Attribution license.

This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.

Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.

Click here for attribution examples