MK4 X-Carriage IGUS Upgrade

The original LM10LUU is 55mm long and the IGUS bearings are 29mm long and wanted to add 2 bearings per side.
So i had to modify the part to make the 2 IGUS bearing fit.
 

!-important-!
You should NOT add the robber pads on the inside. 
This will squeeze the IGUS bearings and the rod will not move freely anymore


Original part at the bottom and new on top.


You need 4 of RJM-01-10 (i also tried RJUM-01 and RJ200UM-01 but where to tight)
https://www.igus.eu/product/986?artNr=RJM-01-10

And 2 of AWMP-10 - 325mm
https://www.igus.eu/product?artNr=AWMP-10



Also look at my other IGUS upgrade :)
https://www.printables.com/model/175765-igus-drylin-linear-rail-upgrade