This is a simple marker that you can mount on a PFD lash tab/point for visibility or to identify your gear.
Printing instructions
- Print as-oriented in the .stl file (on its side), probably with a brim.
Assembly instructions
- To attach, gently work it over the lash point until it hold in place.
- To remove, gently manipulate the rubber lash point to unclip it.
Notes
- I designed this model in OpenSCAD and it's fully parameterized. If you'd like a simple modification for (i.e., length/width, etc.), send me some measurements and I'll see what I can do.
Tags
The author marked this model as their own original creation.