Proxmox logo for your MoxBox

Give your Moxbox some extra flair. You can scale the model, but dont scale Z or the color changes dont line up. You can find my other HomeLab logos on my profile.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ GST3D BLACK Transmission Distance: 4.6
PLA+ GST3D YELLOW Transmission Distance: 4
PLA+ GST3D RED Transmission Distance: 3.5
PLA+ GST3D WHITE Transmission Distance: 4

Swap Instructions:
Start with BLACK
At layer #9 (0.8mm) swap to YELLOW
At layer #13 (1.12mm) swap to RED
At layer #14 (1.2mm) swap to WHITE for the rest.