Strong Velcro Strap Holder

To strap things to walls with velcro bands. I use it indoors, in the shop and in the camper.
In the contest Velcro Prints
114
174
4
1661
updated August 5, 2023

Description

PDF

Yesturday I helped a good friend to  improve his Camper.

Therefore I printed some Velcro holders to mount the Solar Panel & its Cable securely to a wall. The holders are for different widths of velcro and very strong. (I hang myself onto them as a test :D)

There are 3 different sizes. 

  • Small: For Velcro Bands up to 14 mm width.
  • Medium: For Velcro Bands up to 22 mm width.
  • Large: For Velcro Bands up to 30 mm width.

To mount the holder I recommend using 3,5 mm wooden screws. Always make sure not to not to overdo it when tightening the screws.

In the Car I used ASA Filament, 0,3mm layer Height, 0,6 mm Nozzle, 3 Perimeter & 25% infill. 

Annother feature of this design is that the excess cable can be put in between the holder and the wall. So it will not open accidentally and look a lot cleaner. You also may take a very long strap and cycle it around several times this way.

 

Also the design is not only designed for cable management but can also withstand heavier tasks like storing tools.

 

 

Have fun and keep printin!



BTW: I designed other holders too for the electricity that I will release soon.

Tags



Awarded in the contest


Velcro Prints
105 entries | August 4 – August 13, 2023

Model origin

The author marked this model as their own original creation.

License