Hueforge - Tiger
If you like it or even make one, please post it, like, share, and consider a Paypal donation. Thank you!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Elegoo Black Transmission Distance: 0.3
PLA Clas Ohlson Orange Transmission Distance: 11
PLA LotMaxx White Transmission Distance: 7.6
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Orange
At layer #15 (1.28mm) swap to White for the rest.
The author marked this model as their own original creation.