File Box (print-in-place)

Summary:

This is one of my first models using Fusion360. It is a simple box to store up to 12 files. It prints in place with a working hinge and keeps closed using magnets.

Files:

The files are about 150mm in length and the diameter, where the clips of the box snap on, is 3mm.

Closing mechanism:

The box prints in place - you only need to load the file into your slicer and it comes out with a working hinge. Both handles on the left and right side have holes to insert magnets to keep the box closed safely. The holes are dimensioned to hold 6x2mm magnets.

Printing:

You can completely print this without supports, although i recommend using them. The handels just print way cleaner, if you support them. It is quite a distance between the two support surfaces and whether you need supports or not depends on how well your printer is calibrated and deals with bridging.