Hueforge - Cherry Blossoms

A Hueforge model using light blue, light pink, white and black. I think if you have a slightly darker pink the contrast would look better. I only have Sakura and Candy pink and they're both very light. I hope to see your make!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used: PLA
Black Transmission Distance: 0.3
 Sakura Pink Transmission Distance: 3
White Transmission Distance: 6
Light Blue Transmission Distance: 1

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Sakura Pink
At layer #16 (1.36mm) swap to White
At layer #22 (1.84mm) swap to Light Blue for the rest.

-JP