From Luer lock to a 10mm pippet to make collecting microfluidic samples easier
In the contest Lab accessories for MSF
8
22
0
484
updated August 14, 2023

Description

PDF

Print on resin printer with at least 0.1mm resolution.

For use with 10mm id pipette

Ideally clear resin, but other will work. Make sure to unclog the channels soon after the print has finished

 

UPDATED:

Air pressure relief hole reposition as it was found at low flow rates, the fluid would run down and block the hole and then not go into the pippet

 

Model origin

The author marked this model as their own original creation.

License