HSW Tweezer Holder

Tweezer holders for the HSW (Honeycomb Storage Wall). 6 Variation.
14h 44m
6× print file
0.20 mm
0.40 mm
111.00 g
279
1374
32
2930
updated December 29, 2023

Description

PDF

Tweezer Holder for the HSW

Tweezer container, easy to print with 2 models to choose.

Can be printed without support.

Easy to Snap to your Honeycomb Storage Wall.

 

 

Tweezer Dimension

This holder is designed based on the regular tweezer with the following dimensions. 

  • T Thickness must be less than 5mm when it is in compression.
  • W The tweezer must have a maximum of 14 mm.
  • L The length can be 110 mm or more

 

Print orientation:

Print flat as the image shows. No needs support.

Print Settings:

  • Material: PLA/PETG
  • Layer height: 0.2 
  • Perimeters: 4
  • Infill density: 25%
  • Outer Brim 3mm or Glue (Recommended)

Happy Printing!!!

Tags



Model origin

The author remixed this model.

Differences of the remix compared to the original

This is an accessory for the HSW system to hold Tweezer.

License


Highlighted models from creator

View more