An IEC power socket mount for the Rat Rig V-Core 3.
Like many of the V-Core 3 printed parts this part has a sacrificial layer which need to be removed prior to assembly. Use a 3mm drill bit through the two socket mounting holes.
I printed this with 3 perimeters and 25% infill using Rat Rig Green PETG.
No supports required.
Needs 4 x 12mm M6 bolts and 4 x M6 3030 drop-in T nuts to mount the plate and 2 x 8mm M3 bolts and 2 x M3 hex nuts to mount the socket to the plate.
The author marked this model as their own original creation.