Labels for Fast-Printing Modular Drawer System (Vase Mode)

This model is used to label the drawers of @LR3DUK Modular Drawer System.

You need to use supports and most certainly a brim to prevent the part that slides into the joiner slot to lift during printing.

You shall use your slicer to emboss the text onto the labels, and then, insert a pause in the print to swap filament color if you wish to do so.

This is how I sliced my labels in PrusaSlicer:

If you want to use a sticker to label your drawer, you can print the model upside-down and you don't need supports nor brim.

The labels in my pictures are the small ones. I also included a medium and large model which are respectively double and triple the width.