Tablet Holder for NordicTrack GX4.0 Stationary Bike - 2 Versions

My ancient NordicTrack GX4.0 stationary bike was made to hold an iPod (Remember those? Not to be confused with an iPad). Now, I have never actually owned an iPod, but I do have an Android tablet. So I made a tablet holder that fits into the pocket for the iPod.

If you are one of the few out there who also have this NordicTrack model, then this print is for you 😁.

Note that I have included a second “solid” version (without the trusses) for anyone who prefers that look; however, it uses about 35% more filament.

To use this, simply fit the top part of the bracket into the pocket on the bike as shown in the photos, then hang the tablet on the lower hook.

Print Instructions

Print in PLA using the 3mf file provided; otherwise :

• orient on side (see photos)
• 0.3mm layer height
• perimeters = 2
• 0% infill

CAD

The OnShape 3D CAD files for this are here :

https://cad.onshape.com/documents/ef1467fb986cce04bfb41e9e/w/cb760ea8b802b9e8e39235b1/e/c1181826f9b969c6f591e331?renderMode=0&uiState=64c469bf747d986acfec0b16