Multi-material Unicorn

I used the Prusaslicer Multi-Material feature to break the file into 5 colors. This has been done before, but I attached the .3MF file with the Multi-Material changes in it. They don't show when you view the file, but they do after you slice it. The assignment of the different MMU channels are 1=Body, 2=Mane_tail, 3=Horn, 4=eyes_hoves, and 5=Nose_ears.

After a false start where the blue filament jammed, I was able to finish it. The biggest issue was the filament colors bleeding. The waste dump was not long enough to purge traces of the the red, black, or gold colors.

The print took 30 hours, where 23 hours were spent on the waste tower, and 7 on the print. Also the waste tower weighs twice as much as the print…