Cloverleaf Antenne 5.8GHz
Consists of a shaping tool and the final holder. You need to print this very fine cause we have very thin walls.…
3
33
0
261
updated August 20, 2023
Description
PDFConsists of a shaping tool and the final holder.
You need to print this very fine cause we have very thin walls.
03.09.2013: Design changes done. Now I get much better results even with 0,18mm layer height.
05.09.2013: Changed the 3D-Model - added small channels for the negative pole.
Ask for higher resolution 3D-models
Category: ToolsTags
Model origin
The author marked this model as their own original creation. Imported from Thingiverse.
