MagicBand+ Charging Tower

A compact, travel-ready tower for organizing MagicBand+ charging pucks
11h 55m
1× print file
0.15 mm
0.40 mm
111.00 g
88
892
12
3712
updated January 8, 2025

Description

PDF

Solve MagicBand+ charging chaos with this MagicBand+ Charging Tower. Designed to hold up to four (4) MagicBand+ charging cradles and a 4-port USB hub to consolidate everything to a single USB cable that needs to be plugged-in to charge all MagicBands simultaneously!

Slot in the back is designed to (tightly) hold a USB hub that is 10mm thick.

MagicBand+ charging cradles simply press fit in place and cables press fit in channels running around to the back to keep everything tidy. 

One of our more popular designs on Etsy. Appreciate any support you send our way if you find this useful. Publishing here for you, the Makers, that will always prefer to print one for yourselves!

https://www.etsy.com/shop/MagicalExtrasShop 

Print Instructions

Suggested settings with PLA:

  • 18%+ infill (shown with cubic fill)
  • 3+ walls/perimeters
  • At least 3 solid bottom/top layers
  • 0.16mm layer height
  • Supports required for recommended print orientation

This design will just barely fit on a Prusa Mini+ with tree supports.

As shown in pictures, printed in PolyTerra PLA at .16mm layer height with Bambu Labs X1C. Total print time ~3.5 hours.

If you don't want to print your own (or know someone else who can't), these areavailable for purchase on Etsy: https://www.etsy.com/listing/1514229815/magicband-charging-tower 

Need Help? Feedback?

If you have any questions or trouble with this print, or if you have suggestions for additional revisions, send me a message. Happy printing.

And while you're at it, help yourself to my other prints

Tags



Model origin

The author marked this model as their own original creation.

License