📢 Beware of SCAM! If you get a suspicious Messenger message with a link, don’t open it or reply!
3D Models 3D PrintersPrusa Parts & Upgrades

Prusa LACK Enclosure Cable Passthrough

23 reviews
These are larger versions of the cable passthrough tube used for mounting the power supply and/or LCD controller…
1h 53m
2× print file
0.20 mm
0.40 mm
8.00 g
136
1165
19
5823
updated August 29, 2019

Description

PDF

These are larger versions of the cable passthrough tube used for mounting the power supply and/or LCD controller outside of the Prusa LACK Enclosure V2.

  • _lack_cablepassthrough provides enough room for the power cables as well as a USB cable for external control connections. It is sized to fit the cutout from a 3/4" hole saw.

  • _lack_lcd_cablepassthrough is large enough to allow the LCD ribbon cable connectors to pass through. It fits the cutout from a 7/8" hole saw.

Print instructions

Gcode files are sliced for Prusament PETG on an MK3/S using the 0.20mm SPEED MK3 setting.

3mf files have been provided for those who want to do the slicing themselves. The Fusion 360 source file is also available in the files section, and is heavily parameterized for easy tweaking/adjusting.

Model origin

The author remixed this model.

Prusa Enclosure V2 - MMU2S
 by Ondřej Stříteský
 

License