Awesome!
Adjustable wrench Print-in-Place
Also called as Monkey wrench or French wrench or Adjustable spanner. Printed in place.
84
218
3
1213
updated March 8, 2024
Makes
Comments
Awesome design, just like in your video takes a little force and then a nice satisfying “crack” as the layers in the jaw separate and it works flawlessly! I printed it in PLA on my new Voron Trident build as a test before I enclose it. 5 hours and 20 min! Thanks for sharing!
I tired being smart and making a drop in spacer for gap between the jaws. but the PLA ended up curling the petg spacer. so next time no spacer. the top jaw also almost snapped off at the shaft. I'll have to look at more perimeters for the next one. also I shortened it for the MINI build volume. posting the remix soon.
Looks nice, but it's a little too long for Prusa MINI.
Can you please make a shorter version? I'm afraid scaling it down to 90% would mess with tollerances.
@DangeMask check out my remix https://www.printables.com/model/562426-adjustable-wrench-print-in-place-for-mini. I modified the step file in onshape to reduce the neck size. the handle is the same. printed and functioned well. (edited)
@Teslaactions Thank you, sending to the printer right now :-)