CNC 1610 X Axis Endstop

Be sure to align the X stop so that it is in front of the X-axis shaft coupler. 

This is a very basic X axis endstop for the 1610 CNC. Leaving the STEP file here so others can remix as they please. Print it with whatever you want and adjust settings as necessary. You probably want to orient the 

 I'm using off-the-shelf microswitches (ASIN B073TYWX86) and self-tapping M2x10 screws. These tap directly into the plastic, so don't hulk it down. If you've built vorons, you probably have a few of these parts extra. 

Use an M4 bolt and a T-nut or something to fasten it down. An M4x10 would probably be fine, but an M4x8 or 6mm would be ideal.