I wanted a drawer for under my workbench so I came up with this design. Originally I made the tolerances too tight so I had to do a lot of sanding to make it slide more freely, however I have fixed the tolerances and these should slide nicely without any sanding needed.
I used 6 x 3/4 wood screws to mount to my desk, they do have an angled countersink so keep that in mind when selecting the screws.
I wanted a drawer for under my workbench so I came up with this design. Originally I made the tolerances too tight so I had to do a lot of sanding to make it slide more freely, however I have fixed the tolerances and these should slide nicely without any sanding needed.
I used 6 x 3/4 wood screws to mount to my desk, they do have an angled countersink so keep that in mind when selecting the screws.
Printer Brand:
Prusa
Printer:
I3 MK3S
</div>Rafts:No
Supports:
Yes
</div>Resolution:0.2
Infill:
10%
</div>Notes:
Any material does the trick.
The author marked this model as their own original creation. Imported from Thingiverse.