TwoTrees SP Sperrow MOD

Printhead for TwoTrees SP/Sapphire Printers and simular

BOM:
-4 Stanoffs (5x30mm, M3)
-M3 Countersunk screws (10mm, 15mm, 20mm, 25mm)
-M3 usual screws (10mm, 20mm, 30mm)
-M3 nuts

Fit to Parts:

Extruders:
-Sherpa Mini
-Hextrudort
-Orbiter 2.0
-Bowden

Hotends with BMO mounts:
-common like V6 with 22.3mm coolend
-Dragonfly
-Dragon
-Spider
-Red Lizzard
-etc.

PCF:
5015

HEF:
-2510

Probe:
-BL-Touch

more probes and other fanducts will follow for this printhead.

TO USE THIS MOD YOU NEED TO ADD THE Z-SPACER
or use 20mm longer Z-Screw to get 20mm more printspace