Hinge set for Ikea Billy bookcases

I'm sick of dust getting into my bookcases, so I installed acrylic sheet doors on them to keep it out. I've added the handle and magnet holder files I used to keep the doors shut. 

Hinges- 0.2mm layer height, 0.4mm nozzle, 50% infill, include all supports. Be careful when removing supports, because the barrel can snap during removal. The holes are meant for M5 screws!

Handle + magnet holder- 0.2mm layer height, 0.4mm nozzle, 10% infill, no supports needed (you can print these with any settings, they're not structural)

The magnets I modelled these for are 15x5mm. 

The distance between Billy bookcase walls is ~36cm. I suggest designing acrylic doors that extend slightly below the lower shelf.