Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA+ GST3D BLACK Transmission Distance: 4.6
PLA+ GST3D ARMY GREEN Transmission Distance: 8.5
PLA+ GST3D RED Transmission Distance: 3.5
PLA+ GST3D BROWN Transmission Distance: 2
PLA+ GST3D YELLOW Transmission Distance: 4
PLA+ GST3D WHITE Transmission Distance: 4
Swap Instructions:
BLACK until layer #6 at 0.56mm
ARMY GREEN until layer #7 at 0.64mm
RED until layer #8 at 0.72mm
BROWN until layer #9 at 0.8mm
YELLOW until layer #10 at 0.88mm
WHITE for the rest.
If you print this, posting a make will be highly appreciated!
The author marked this model as their own original creation.