________________
This is spool adapter for Bambu Lab AMS that can fit a wide range of 200g/250g mini spools. See illustration for sample 250g spools that can be accommodated.
Version 2 addresses the flaws of the original design where the spindle will break easily either by overtightening or by dropping the spool. This release now has the spindle printed separately from the spool, made wider and is now horizontally oriented for added strength.
Design an adapter for 250g spools that can be printed once and can be reused over and over catering to a wide variety of the mini spools.
The threaded hub design lets you spin the spool clockwise to tighten, counter clockwise to unlock, which makes the adapter super quick and easy to transfer to another mini spool!
This adapter has been tested to work on the following filament brands' mini spools:
Brand | OD (in mm) | ID (in mm) | Width (in mm) |
---|---|---|---|
3D Genius | 140 | 58 | 43 |
3D Jake ecoPLA | 140 | 51 | 44 |
Amolen | 150 | 55 | 35 |
Bblife | 134 | 53 | 44 |
Bud3D | 150 | 53 | 35 |
Cindeer | 150 | 52 | 37 |
Creality | 141 | 55 | 38 |
Dikale | 140 | 58 | 43 |
MIKA3D | 134 | 53 | 44 |
MKOEM | 134 | 53 | 44 |
Printbed | 120 | 52 | 37 |
Sunlu | 120 | 42 | 47 |
Tecsonar | 150 | 55 | 35 |
Tinmorry | 150 | 55 | 35 |
Tttyt3D | 134 | 53 | 44 |
Yousu | 152 | 54 | 40 |
Appreciate if you post your make and the brand you used the adapter for so that I can expand the list!
The author marked this model as their own original creation.