SV06 Plus and SV07 plus Z Axis leveling tool

Fast Check if your Z axis is stil level with the bed on your Sovol SV06 Plus.

I remixed these from the SV06 ones because after homing the SV06 Plus has a different gantry heigt.

After homing the printer head and turning off the steppermotors you can adjust the alignement of your Z axis by placing these small pillars under the gantry and adjust so they are on top of the pillars.

I also made a holder for the pillars wich you can mount on the printer itself to hold them if you're not using them so they won't be laying around somewhere.

Please leave a like and post your makes, thanks…

Edit 13 october 2023:

After post by someone making it to check the gantry heigt on a SV07 plus it seems it also works on the latest Sovol SV07 plus variant.

I made it a bit taller because the home position on the SV06+ is higher above the buildplate Than the regular SV06.