They do the job
SV06 Plus and SV07 plus Z Axis leveling tool
To fast check if your Z axis is properly alligned on your Sovol SV06 plus and SV07 Plus
99
819
13
3208
updated October 13, 2023
Makes
Comments
Perfect tool to help keep the X gantry level to the bed. Ive never been a fan of the ramming method against the top rails. It takes forever for the movement. This is much quicker and I feel it gives a more accurate leveling. Thanks for the model!
Thank you for the post
Yo where did you get the movable marker for Z axis motors? Seems handy for leveling gantry
(deleted)
really help to get levelled and remove the headache.
Black is ABS and the bluish is light blue pla from esun
@Riddlich_1743451
Thanks for the post and enjoy.
Printed with 0.6mm steel nozzle fairly well. Needed a little sanding smooth things out, but not too bad.
I cant get the actual levelers to slice properly in prusalslicer? what the heck
View one more comment
If any1 noob as me needs this, you just need to use it on Cura Slicer
@JesusReyPonc_1701159 You can repair the model within PrusaSlicer/SuperSlicer
Quick print and it works perfectly to do the job. I use them on my Sv06 and SV06 plus to manually set the gantry parallel to the bed. They fit perfectly in the holder and it fits perfectly into the rail on the printer. Thank you for sharing.
@SamSkwanch Thanks for your post.
@SamSkwanch thanks for your post of the print.
View one more comment
@Martijn_724463 I have an SV07 Plus, it was released in end August.
In fact printables didn't have it listed as an available printer option till recently. I just updated my profile actually.
@DittiDoes_495066 good to know there already is a sv07+, i will change the headline to mention it wil also work for the sv07+.