I needed a bracket for stacking IKEA Lack tables and wanted one that didn't need extra hardware to attach
2h 54m
1× print file
0.25 mm
0.40 mm
54.00 g
72
304
3
2122
updated July 17, 2023

Description

PDF

Most other Ikea Lack table brackets I have found require screws or other hardware. Under normal forces that will be acting on the table though just a basic bracket that is sized well to the lack table legs should be good enough without needing any extra hardware.

The brackets themselves fit nicely on the lack tables legs without needing to be forced on. The skirt extends the full length of the table platforms height and has clearance for the lack tables legs being inset slightly from being flush with the edge of the table when screwed on normally.

Model prints nicely in both PLA and PETG without supports and I plan to have both leg extensions as well as another for holding Acriyic sheets to make a proper enclosure soon.

Tags



Model origin

The author marked this model as their own original creation.

License