Recently, I bought a PSU extension cable kit from Formula Mod
There are some combs on each cable, but they are not enough to make the cables look good
Also, this cable has a shorter diameter than the default ones, so it needs custom combs that you can't buy in the shop
So, I've done my own cable combs
P.S. I left the .f3d file of my model so that you could create your own number of Pins
Material: PLA or other
Nozzle: 0.4 mm
Layer Height: 0.2 mm
Support: No
Infill: 15%
The author marked this model as their own original creation.