Sapphire Plus Afterburner Mod

Use the parts from his project for the hotend and fan mounts (except the front bracket). In my design you will find all customized parts to make a fitting extruder based on the Voron design. For remaining parts and assembly instructions check the original documentation.

In case you wonder: the two colors where made by printing the logo face down with a 0.1 resolution and printing the front plate on top afterwards.

If I got some more time I will also come up with an own full assembly but it I probably wont really find the time.

Would be great if you could give me feedback in the comments, a like and post a make if you did this.

Print Settings

Printer:

Sapphire Plus

Rafts: 

Doesn't Matter

Supports:

No

Resolution: 

200

Infill:

40

Filament:

Generic PETG/ABS 

Category: 3D Printer Extruders