Pistol grip camera for the Raspberry Pi HQ camera module

Building a Raspberry Pi HQ camera module into a pistol grip chassis. It's really hacked-together as a learning exercise for OpenSCAD, so it's by no means perfect. It's thus a work in progress, and some bits might improve over time.

Update 2020-07-01: improved locating foot and shoe tolerances.

Update 2020-07-07: Improved strength of locating shoe on handle

You'll need four M2.3x8mm self-tapping screws to fit the camera. The sloping top is designed to mount a Raspberry Pi in a case using Velcro strips. I'm using a cheap touchscreen for the interface. The handle can take a battery, its designed to fit two 18650s in holders but I use a single 18650 booster pack.

The pistol grip screw cap uses the necks and caps library by [Xavan], under a CC BY 4.0 licence, from https://www.thingiverse.com/thing:1654620

All OpenSCAD files as well as ongoing work with software can be found at https://github.com/JennyList/PistolGripCamera

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

No

Supports:

Yes

Resolution:

Draft

Infill:

20%

Filament: Generic PLA