Traxxas TRX-4M Drive hex +1.8mm (TRX4M)

7mm long drive hex for the Traxxas TRX-4M Defender.

I did not like how the axle thread is vissible with the stock hex drives (just asking to be damaged). This one is just long enough to have the nut flush with the end of the thread while still engaging the locking ring within the nut.

Stock hex drive is 5.2mm in lenght, so this new one is 1.8mm longer. Nice snug fit onto the axle for my prints. I used 0.12mm layer height and 100% infill, cooling fans on 100%.

Pictures show the stock drive hex on the left side of the image (right front wheel) and the new printed drive hex on the right side of the image (left front wheel).